Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Chimney Company in Phoenix, AZ
Chimney repair in Phoenix starts with the sun. The masonry chimneys on the ranch homes of north-central Phoenix were built for a handful of winter fires a year, and they’ve spent half a century baking under a dry desert sky. That heat cracks crowns, splits flashing seals, and leaves caps rusted thin. We’re the team at Chandler Chimney Sweep, and we diagnose, we clean, and we repair under one qualified contractor so you’re not handing the hard part to a second company. Call (855) 664-1862 and we’ll talk through what your chimney needs.
Why Phoenix Homes Are Different
In a cold-climate city, a chimney works hard. Fires burn most nights for months, creosote builds fast, and the maintenance rhythm is built around that load. Phoenix isn’t that city. Here, fireplaces sit idle for nine months, then everyone lights a fire on the same few cool evenings in December and January. What accumulates is different: heavy soot from occasional use, fine desert dust, blown-in grit, and whatever the summer monsoons pushed down the flue. Downdrafts during storm season drive debris and nesting material straight into open chimneys.
The housing stock matters just as much. North-central Phoenix ZIPs like 85012 and the blocks around North Mountain are dominated by 1950s to 1970s single-story ranch and block homes, many still carrying their original masonry fireplaces and beehive or straight-sided brick chimneys. You’ll find prefab inserts added later in some of them. Stucco-over-block walls and flat or low-pitch roofs are the norm, which changes how flashing seals age and how water sits on a crown. A cap that’s simply missing, or rusted through from sun exposure rather than freeze damage, is the most common thing we find out there.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Main Phoenix Services
Two jobs bring most Phoenix homeowners to us: getting the flue clean before fire season, and getting the vent behind the dryer cleared out.
Chimney Sweep in Phoenix
A Phoenix sweep isn’t only about creosote. In homes around Sunnyslope and the streets off North Mountain, chimneys that haven’t burned in years still collect desert pack-rat nests, palm frond debris, and layers of fine dust, and summer monsoon winds push more of it through any gap in the cap. We run a camera first so you see what’s actually in the flue, then sweep with the right brushes for masonry or a prefab liner, and clear the smoke shelf and firebox. You get a photo report of the before and after. If you want the full story on that visit, see Chimney Sweep in Phoenix.
Dryer Vent Cleaning in Phoenix
Dust and lint don’t need humidity to build up. In this climate the dryer runs hard and the vent line collects a dry, dense lint pack that restricts airflow and raises the drum temperature. Long vent runs through a low-pitch attic make it worse, and plenty of Phoenix ranch homes have exactly that layout. We clean the run end to end and check the exterior termination for screens or flaps that trap lint. This is a standalone service, not an add-on, so you don’t need a chimney at all to book it. Details live on our dryer vent cleaning page.
Chimney Repair in Phoenix
Most of the chimney repair we do in Phoenix is corrective work on masonry chimneys built between the 1950s and 1970s that have spent half a century under intense sun. The damage pattern isn’t freeze-thaw; it’s ultraviolet degradation of the cap, thermal movement cracking the crown, and flashing seals that dry out and pull away from stucco. That’s the work we handle through chimney repair, and we can tell you honestly when something can safely wait another season.
Chimney Cap Installation
Signs you need it
You need a cap if the flue is open to the sky, which is common on north-central Phoenix homes where the original cap was never fitted or has simply rusted away.
What it costs in Phoenix
Cap installation typically runs $250 to $650 in Phoenix, depending on flue size, cap style, and how the cap has to be anchored to the masonry.
How we do it
We measure the flue and crown, fit a stainless cap sized to the opening with a spark-arresting mesh, and anchor it so monsoon winds and downdrafts can’t lift it.
Chimney Cap Replacement
Signs you need it
A rusted-through top, a cap sitting crooked, or mesh that’s torn and letting birds in all point to replacement rather than a patch.
What it costs in Phoenix
Replacing a cap is typically $250 to $650 in Phoenix, and removing a seized or rusted old cap can move you toward the upper end of that range.
How we do it
We cut or unbolt the old cap, inspect the crown underneath for damage it was hiding, and set a new cap with fresh fasteners rated for sun and heat.
Chimney Liner Installation
Signs you need it
Cracked clay tiles, gaps visible on camera, or a flue with no liner at all mean you need a liner before the fireplace sees another fire.
What it costs in Phoenix
Liner installation typically runs $1,800 to $4,500 in Phoenix, depending on liner type, flue length, and whether the old clay tiles have to be broken out first.
How we do it
We sweep and camera the flue, then install a stainless liner sized to the appliance, insulating around it and connecting it at the top plate and the firebox.
Chimney Flashing Repair
Signs you need it
Water staining on the ceiling near the chimney, or flashing that’s lifted away from the stucco, means the seal has failed.
What it costs in Phoenix
Flashing repair is typically $300 to $900 in Phoenix, and low-pitch roofs that need custom flashing work sit toward the top of that range.
How we do it
We lift and reset the flashing, re-seal it against the stucco and roof surface with a UV-stable sealant, and check the counter-flashing is doing its job.
What Chimney Repair Costs in Phoenix
| Item | Typical range in Phoenix |
|---|---|
| Chimney cap installation | $250 – $650 |
| Chimney cap replacement | $250 – $650 |
| Chimney liner installation | $1,800 – $4,500 |
| Chimney flashing repair | $300 – $900 |
Is chimney repair in Phoenix urgent, or can it wait?
Some of it waits and some of it doesn’t. A cracked crown or lifted flashing can usually be scheduled before the next monsoon; a cracked liner or a missing cap letting nests into the flue should be handled before you light a fire. We tell you which is which after the camera inspection.
Do I really need a new liner?
Not always. We’ll show you the camera footage of the flue interior and explain what we see. If the tiles are sound and the clearances are right, a clean and a cap may be all you need. Call (855) 664-1862 for a free estimate and we’ll be straight with you.
Brands We Service in Phoenix
We work with professional-grade materials and systems, including HeatShield ceramic resurfacing for restorative chimney repair, Gelco liners, and Olympia Chimney components. These are products specified by tradespeople, not big-box substitutes. Because nothing is stocked locally, turnaround depends on the system ordered for your job, and we’ll tell you the lead time upfront. You can read more on our brands page.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Company in Phoenix, AZ
| Service | Typical range in Phoenix |
|---|---|
| Chimney cap installation | $250 – $650 |
| Chimney cap replacement | $250 – $650 |
| Chimney liner installation | $1,800 – $4,500 |
| Chimney flashing repair | $300 – $900 |
| Chimney sweeping | $150 – $350 |
| Dryer vent cleaning | $120 – $275 |
In Phoenix, price moves with access and condition: a flat roof with a tricky flashing detail costs more than a straight run, and a flue full of hardened creosote or a rusted cap that won’t budge takes longer than a routine sweep. We give you a flat price in writing before we book, and that written estimate sets the final number.
Neighborhoods We Serve in Phoenix
We work across north-central Phoenix, where the mid-century ranch homes and their original masonry fireplaces cluster together. That means Sunnyslope, the streets around North Mountain, and the older blocks through 85012 and 85018. We also cover homes further out where newer construction added prefab inserts to the mix. One note on timing: Phoenix is a wide city, and how far you are from the center affects how quickly we can get a technician to you, so book ahead of the winter fire season rather than the week you want to light one.
- Sunnyslope
- North Mountain
- 85012
- 85018
- Arcadia
Service Area – Cities Near Phoenix
Phoenix sits in the middle of a spread-out metro, and we serve the communities around it. If you’re just outside the city line, we can still help: homeowners in Tempe, AZ and Maricopa Colony, AZ call us for the same chimney and vent work. Further out, we cover Gila Crossing, AZ and, for homes in the high country, St. Johns, AZ. Wherever you are in the valley, the process is the same: camera first, written price, then the work.
Serving Phoenix, AZ – Our Local Coverage Area
We serve Phoenix and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Chimney Company in Phoenix
It depends on where you are in the city and what’s already booked. We schedule sweeps and repairs ahead of the winter fire season, so calling in early fall gives you the widest choice of dates. Call (855) 664-1862 and we’ll find you an opening. We answer 24/7, and fast dispatch runs from 7am to 7pm, Sunday through Friday.
Some repairs do and some don’t, and it depends on the scope of the work. A liner installation or a change to the chimney structure is more likely to require one than a cap replacement. Check with the city’s building department before work starts, and we’ll tell you what the job involves so you know what to ask.
We serve Phoenix and the surrounding communities, including Tempe, Maricopa Colony, Gila Crossing, and St. Johns. If you’re unsure whether your address falls into our coverage, call (855) 664-1862 with your cross streets and we’ll confirm before you book anything.
If your chimney hasn’t been looked at since the last fire season, or your dryer is taking two cycles to finish a load, that’s your cue. Call (855) 664-1862 for a free estimate on chimney repair, a sweep, or dryer vent cleaning in Phoenix. We answer 24/7, and fast dispatch runs from 7am to 7pm, Sunday through Friday. We diagnose, we clean, we repair, and you’ll see the camera evidence before anyone recommends a thing.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you. The visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Phoenix Customers Say
"Swept it, capped it, and installed a proper damper. The downdraft smell in the summer that we'd lived with for years is gone."
- Katie Kowalski"Level two inspection before we bought the house. The report was detailed enough to use as a negotiating point and he explained every photo in it."
- Xavier Whitfield"Drop cloths everywhere, HEPA vac, and not a speck of soot on the carpet. I'd been dreading the mess for nothing."
- Dale Miller