Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Chimney Company in Mesa, AZ
Chimney repair in Mesa comes down to one thing most homeowners here don’t expect: their fireplace hasn’t failed from heavy burning, it’s failed from sitting still. The East Valley’s ranch homes were built for ambiance, and most fireplaces run a handful of nights each winter. That leaves flues idle through months of triple-digit heat and a monsoon season that pushes grit and rain where they don’t belong. We diagnose the damage first, show you what we found, and fix only what the camera proves. For chimney repair in Mesa, call (855) 664-1862.
Why Mesa Homes Are Different
Mesa’s housing stock shapes the work. East Mesa and the corridors around 85205, 85206, 85208 and 85215 filled in with single-story stucco-on-block ranch homes through the 1980s and 1990s, and many of those picked up factory-built or masonry fireplaces as an amenity rather than a heating system. The clay tile liners and metal fireboxes from that era are now aging faster than the houses around them. Meanwhile, the older pockets near downtown have smaller mid-century fireplaces with shallow fireboxes that leave little room for a camera, let alone a brush.
Then there’s the climate. Mesa’s dry heat bakes masonry mortar and shrinks clay tile for months, and the July to September monsoon answers back with wind-driven dust, rain intrusion and downdrafts down flues that sat open all summer. That swing – crack in the dry season, moisture in the wet one – traces back to most of the service calls we get here. It’s the opposite of what a snow-state sweep sees.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Main Mesa Services
Two jobs account for almost everything Mesa homeowners call us about, and each has its own dedicated page with the full detail.
Chimney Sweep in Mesa
A sweep in Mesa is rarely about thick creosote. It’s about the nine dormant months. Flues that sat closed through summer collect dust, grit off the wind, and the occasional bird or pigeon nest packed into the cap screen. We run a camera, brush the flue, and clear whatever has taken up residence. Then we show you the photos so you know what we’re describing. If your first fire of the season is coming up, Chimney Sweep in Mesa walks through what the visit covers.

Dryer Vent Cleaning in Mesa
Lint accumulates in a dryer duct the same way it does in the trap, just slower and out of sight. In a Mesa home where the dryer sits against an exterior wall and the duct runs through a hot attic, that buildup dries out and packs tight. It’s a leading cause of house fires and most homeowners never think about it. Our Dryer Vent Cleaning in Mesa page explains the signs, the tools we use, and why the run length matters so much.

Chimney Repair in Mesa
The repairs we make in Mesa are mostly caused by neglect and heat, not overuse. A masonry fireplace added in the 1980s may sit unused through a decade of triple-digit summers, and the clay tile liner inside it shrinks and cracks while the mortar holding the crown together dries out. When the monsoon finally drives rain down an uncapped flue, that cracked liner lets water into the chase. Our Chimney Repair work starts with a camera inspection and a photo record, then moves to the fix that actually addresses the cause. We diagnose, we clean, we repair – one qualified contractor from first look to final seal.
Chimney Liner Installation
Signs you need it
You need a liner when the camera shows cracked, spalled or missing clay tiles, gaps at the joints, or a flue that was never lined to begin with – common in older Mesa fireplaces with shallow fireboxes.
What it costs in Mesa
A chimney liner installation in Mesa typically runs $1,800 to $4,500, with stainless systems from DuraFlex and Olympia Chimney at the upper end and shorter runs on smaller flues near the lower.
How we do it
We measure the flue, remove or bypass the failed tile, size the new liner to the appliance, insulate where it’s called for, and seal the top and bottom so the system is continuous from firebox to cap.
Chimney Cap Installation
Signs you need it
A missing or rusted-out cap is the reason birds, pigeons and monsoon grit end up in a Mesa flue, and it’s usually obvious from the ground or from the debris the sweep pulls out.
What it costs in Mesa
Chimney cap installation in Mesa generally falls between $175 and $550, depending on the size of the flue and whether the cap is a simple single-flue model or a multi-flue stainless top from Gelco or Famco.
How we do it
We size the cap to the flue opening, mount it to the crown or chase with proper standoff for draft, and seal the edges so water can’t work its way back down the sides.
What Chimney Repair Costs in Mesa
These are typical ranges for the repairs we see most often in Mesa. The written estimate you get after the inspection is what sets your final price, and it won’t move once you’ve agreed to it.
| Item | Typical range in Mesa |
|---|---|
| Chimney cap installation | $175 – $550 |
| Chimney liner installation | $1,800 – $4,500 |
| Chimney crown repair | $350 – $900 |
Do I really need a new liner in Mesa, or can mine be patched?
Sometimes it can be resurfaced instead. If the clay tile is intact but the joints are eroded, a HeatShield ceramic resurfacing restores the flue from the inside. If the tile is cracked through or missing, a new liner is the correct fix. The camera decides, and you’ll see the same footage we do.
What actually happens if I put off chimney repair in Mesa?
Small cracks open wider through another summer of dry heat. Monsoon rain then finds them, and moisture in the chase damages masonry from the outside in. A repair that starts as a crown seal can become a full reline. Call (855) 664-1862 for an exact quote – estimates are free.
Brands We Service in Mesa
We work with an industry-recognized brand roster: DuraFlex and Olympia Chimney for liner systems, Gelco and Famco for caps and venting components, and HeatShield for ceramic resurfacing. These are products professionals specify, sourced through supply channels rather than big-box shelves. If you want to see the full range, browse our brands, and we’ll confirm what a given Mesa job needs at the estimate.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Company in Mesa, AZ
Here’s what the work typically runs in Mesa. Every figure is an estimate until an inspection sets the scope.
| Service | Typical range in Mesa |
|---|---|
| Chimney sweep and inspection | $150 – $400 |
| Chimney cap installation | $175 – $550 |
| Chimney cap replacement | $200 – $600 |
| Chimney crown repair | $350 – $900 |
| Chimney flashing repair | $300 – $850 |
| Chimney liner installation | $1,800 – $4,500 |
| Dryer vent cleaning | $95 – $225 |
In Mesa, the price climbs with access and with how much hidden damage the camera uncovers – a tall chase, a shallow mid-century firebox, or a liner that’s cracked in more than one section all add work. We inspect first, quote the actual scope in writing, and the flat price you agree to is what you pay.
Neighborhoods We Serve in Mesa
We work across Mesa, from the Sunbelt subdivisions in the east to the older pockets near downtown. The retirement-era homes around 85205 and 85206 and the ranch corridors toward 85215 are where most of our idle-chimney inspections land, while the smaller mid-century fireplaces near downtown get their own approach. Timing depends on the season and how booked the week is, not on which side of the city you’re on: we answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
- East Mesa around 85205 and 85206
- The 85208 and 85215 corridors
- Sunland Springs and the Las Sendas area
- Downtown Mesa and the mid-century pockets near 85203
- Red Mountain Ranch
Service Area – Cities Near Mesa
Mesa sits in the middle of the East Valley, so we also work the surrounding cities on the same idle-chimney and repair standard. If you’re just outside Mesa, we can still help. We serve Gilbert, AZ, Tempe, AZ, Chandler, AZ and Phoenix, AZ, and the closest of those usually book into the same window as a Mesa job. Call (855) 664-1862 to confirm coverage for your address.
Serving Mesa, AZ – Our Local Coverage Area
We serve Mesa and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Chimney Company in Mesa
Yes, Mesa is core to our service area. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. A call outside dispatch hours is booked into the next opening.
Some structural chimney work and liner replacements do require a permit, depending on the scope. Mesa’s building department sets what’s needed, and we’ll tell you at the estimate whether your job crosses that line so you’re not caught out later.
We can. Many Mesa HOAs in the Sunbelt subdivisions restrict visible changes like cap style or chase modifications. We’ll note what’s exterior-visible on the written estimate so you can check it against your HOA’s rules before work starts.
If your fireplace has been idle since last winter, or you’ve noticed cracked masonry, a missing cap or grit in the firebox, that’s the moment to look. Call (855) 664-1862 for a free estimate. We answer 24/7, fast dispatch from 7am to 7pm, Sunday through Friday, and the flat price we quote in writing is what you pay.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you. The visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Mesa Customers Say
"Drop cloths everywhere, HEPA vac, and not a speck of soot on the carpet. I'd been dreading the mess for nothing."
- Dale Miller"Good work. The written inspection report took about a week to arrive after I asked for it, which was slower than I expected."
- Nicole Parker"Crown was cracked and taking water. Repaired it rather than quoting a rebuild, which the previous company had pushed hard for."
- Travis Reed